Pneumatic Fittings, Composite Push in Fittings (PT, R, BSPT Thread) - PH Male Banjo

Push-in Male Banjo is used to connect a tubing at a 90° angle to a female threaded port. Tightened on the top of the fitting by use of a flat wrench or a socket wrench. Accommodate metric tubing O.D ranging from 4mm to 12mm, inch tubing O.D ranging from 1/8" to 1/2". External tightening with a flat wrench. Thread sizes range from BSPT1/8 to BSPT1/2.

All Pneuflex's composite push-in fittings, push to connect fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.

		Fluid Admitted	Air, Vaccum, Water(no freezing)
		Working Pressure	0—1.0MPa \| 0—150psi
		Proof Pressure	3.0Mpa \| 435psi
		Negative Pressure	-100Kpa \| -29.5 In Hg
		Working Temperature	0—60°C \| 32～140°F
		Applicable Tube	PU / PA / PE / PVC
		Body	Nickel Plated Brass & PBT
		Seal, O-ring	NBR
		Lock Claw	Stainless Steel(SUS)

Metric Tube ØD

4mm

5mm

6mm

7mm

8mm

9mm

10mm

12mm

14mm

15mm

16mm

Inch Tube ØD

1/8"

5/32"

3/16"

1/4"

5/16"

3/8"

1/2"

Thread Standard and Type

R, PT, BSPT -- 55° Taper Pipe Thread				Metric Thread*
R1/8	R1/4	R3/8	R1/2	M5 x 0.8	M6 x 1	M8 x 1	M10 x 1	M12 x 1.25	M14 x 1.5	M16 x 1.5	M20 x 1.5

Metric Tube (mm)- PT, R, BSPT Thread

Part No.	Push-in Tube ΦD(mm)	Thread (PT, R, BSPT)
PH 04-M5	4mm	M5
PH 04-M6	4mm	M6
PH 04-01	4mm	R1/8
PH 04-02	4mm	R1/4
PH 06-M5	6mm	M5
PH 06-M6	6mm	M6
PH 06-01	6mm	R1/8
PH 06-02	6mm	R1/4
PH 06-03	6mm	R3/8
PH 06-04	6mm	R1/2
PH 08-01	8mm	R1/8
PH 08-02	8mm	R1/4
PH 08-03	8mm	R3/8
PH 08-04	8mm	R1/2
PH 10-01	10mm	R1/8
PH 10-02	10mm	R1/4
PH 10-03	10mm	R3/8
PH 10-04	10mm	R1/2
PH 12-02	12mm	R1/4
PH 12-03	12mm	R3/8
PH 12-04	12mm	R1/2

*M8, M10, M12, M14, M16 and M20 thread are also available. Pls contact with our Sales.

Inch Tube - PT, R, BSPT Thread

Part No.	Push-in Tube ΦD(Inch)	Thread (PT, R, BSPT)
PH 5/32-M5	5/32"	M5
PH 5/32-M6	5/32"	M6
PH 5/32-01	5/32"	R1/8
PH 5/32-02	5/32"	R1/4
PH 1/4-M5	1/4"	M5
PH 1/4-M6	1/4"	M6
PH 1/4-01	1/4"	R1/8
PH 1/4-02	1/4"	R1/4
PH 1/4-03	1/4"	R3/8
PH 1/4-04	1/4"	R1/2
PH 5/16-01	5/16"	R1/8
PH 5/16-02	5/16"	R1/4
PH 5/16-03	5/16"	R3/8
PH 5/16-04	5/16"	R1/2
PH 3/8-01	3/8"	R1/8
PH 3/8-02	3/8"	R1/4
PH 3/8-03	3/8"	R3/8
PH 3/8-04	3/8"	R1/2
PH 1/2-02	1/2"	R1/4
PH 1/2-03	1/2"	R3/8
PH 1/2-04	1/2"	R1/2

Documentation

Part#	ØD	E	B	ØP	A	R	H
PH 04-M5	4	20	17	11	4	M5	8
PH 04-M6	4	20	17	11	4.1	M6	8
PH 04-01	4	22.5	26	11	7	R1/8	12
PH 04-02	4	24	23.5	11	9.5	R1/4	14
PH 06-M5	6	22	17	13.4	4	M5	8
PH 06-M6	6	22	17	13.4	4.1	M6	8
PH 06-01	6	23	23.5	13.4	7	R1/8	12
PH 06-02	6	25	26	13.4	9.5	R1/4	14
PH 06-03	6	27	31.5	13.4	10	R3/8	19
PH 08-01	8	25.5	23.5	15	7	R1/8	12
PH 08-02	8	28.5	26	15	9.5	R1/4	14
PH 08-03	8	29.5	31.5	15	10	R3/8	19
PH 08-04	8	32.5	38.5	15	13	R1/2	24
PH 10-01	10	30	23.5	18.8	7	R1/8	12
PH 10-02	10	32	26	18.8	9.5	R1/4	14
PH 10-03	10	33	31.5	18.8	10	R3/8	19
PH 10-04	10	36	38.5	18.8	13	R1/2	21
PH 12-02	12	34	26	21	9.5	R1/4	14
PH 12-03	12	35.5	31.5	21	10	R3/8	19
PH 12-04	12	36.5	38.5	21	13	R1/2	24