Pneumatic Sintered Silencers & Mufflers - BSLV Brass Silencers with SUS Mesh
Brass silencers with stainless steel mesh are widely used on the exhausts of valves to reduce the noise and prevent metal chips, abrasive grits, dust and other contaminants from entering open exhaust ports and causing premature valve failure. Brass silencers with stainless steel mesh are made of stainless steel mesh and brass. External tightening with a flat wrench or socket wrench.
Available thread types and sizes:
• PT, R, BSPT; NPT; BSPP, G; Metric Thread
• 1/8" to 1"
![]() |
Fluid Admitted | Compressed Air | |
Max Working Pressure | 2MPa | 300psi | ||
Working Temperature | -20°C—80°C | -4°F—175°F | ||
Body(noise absorbing material) | Stainless Steel Mesh | ||
Base(thread) | Brass | ||
Thread Standard and Type |
PT, R, BSPT - 55° Taper Pipe Thread | ||||||||
R1/8 | R1/4 | R3/8 | R1/2 | R3/4 | R1 | R1.1/4 | R1.1/2 | R2 |
BSPP, G - 55° Parallel Pipe Thread | ||||||||
G1/8 | G1/4 | G3/8 | G1/2 | G3/4 | G1 | G1.1/4 | G1.1/2 | G2 |
UNF | NPT - 60°American Standard Taper Pipe Thread | ||||||||
10-32UNF | NPT1/8 | NPT1/4 | NPT3/8 | NPT1/2 | NPT3/4 | NPT1 | NPT1.1/4 | NPT1.1/2 | NPT2 |
Metric Thread | |||||||
M5 x 0.8 | M6 x 1 | M8 x 1 | M10 x 1 | M12 x 1.25 | M14 x 1.5 | M16 x 1.5 | M20 x 1.5 |
PT, R, BSPT Thread
Part No. | PT, R, BSPT Thread |
BSLV 01 | R1/8 |
BSLV 02 | R1/4 |
BSLV 03 | R3/8 |
BSLV 04 | R1/2 |
BSLV 06 | R3/4 |
BSLV 08 | R1 |
BSPP, G Thread
Part No. | BSPP, G Thread |
BSLV G01 | G1/8 |
BSLV G02 | G1/4 |
BSLV G03 | G3/8 |
BSLV G04 | G1/2 |
BSLV G06 | G3/4 |
BSLV G08 | G1 |
NPT Thread
Part No. | NPT Thread |
BSLV N01 | NPT1/8 |
BSLV N02 | NPT1/4 |
BSLV N03 | NPT3/8 |
BSLV N04 | NPT1/2 |
BSLV N06 | NPT3/4 |
BSLV N08 | NPT1 |
Metric Thread
Part No. | Metric Thread |
BSLV M8 | M8 x 1 |
BSLV M10 | M10 x 1 |
BSLV M12 | M12 x 1.25 |
BSLV M14 | M14 x 1.5 |
BSLV M16 | M16 x 1.5 |
BSLV M20 | M20 x 1.5 |
Documentation
*Information contained herein may be changed without prior notification.